2/13/2011

Making Tonner Full Body Hangers Function Properly

This article and it's accompanying images was written by Miriam Shepard of Chevy Chase, MD who has granted permission for it's reprint.

Why in the world did Tonner design hangers for his wardrobe trunks that do not function for 90% of the clothing he makes? I love the look of the plexiglass body hangers but the shoulders won't hold the clothing in place so I figured out a way to make clear plastic shoulders for the hangers that make them work and aren't an eyesore. I wish Tonner would take up my idea and make these himself with cute little TW insignias to fit his hangers. Dream on Miriam.

You will need:
Strong scissors
An Exacto knife or cutting blade
Paper to make a pattern.
One clear plastic boxes that UB Tylers come in or similar flexible plastic. Cut it up along the fold lines.
Here are pics of the pattern and of the clear plastic shoulders
From paper cut a rectangle that is 2 inches wide by 3-5/8 inches tall. Fold it in half lengthwise. Trim the corners on two sides as shown in the picture above.
Use your paper pattern as a guide to cut your plastic. I find it is easiest to first cut the plastic box into panels and then cut them into 3- 5/8 inch sections and then fold the sections lengthwise and trim to 1 inch folded.

Finally, trim the "shoulders".

After folding and trimming the plastic, use the Xacto knife to cut through the fold so that the body hanger will slip through and the plastic shoulders slide down in place on the "shoulders of the hanger.


This is a dress falling off the Tonner hanger. Boo!



Finally, the dress is hanging on the new shoulders which look good with the plexiglass hanger.

1 comment:

  1. phew! i am glad i never got around to spending money on these....

    ReplyDelete